Here is all the Stuff I printed with my new P1S thus far!
Since im here, I’ll need a bit of advice/guidance tho… For one, sometimes the nozzle doesn’t clean itself properly and flings its poop on the bed. From what I read I can put an A1 Nozzle Wiper somewhere to insure it cleans better?
And for the bigger, what I asume to be Issue, even when it wipes itself successfully, there always comes out a large string of Filament afterwards, which the P1S does not try to clean. Then going on to print away with this string still on. It seems very unintentional. 
While this is manageable in single colour prints, it makes using the AMS basically impossible, as this happens after every Colour change. This is what the bed looked like after my only proper Multicolour Print… 
Anyone faced the same issue who could maybe help me?
Really getting tired of the Bambu Lab fan boys, there are already too many of us!
Hey there are other great printers but also it’s fine to recognize a great printer.
The rest of the industry is quickly playing catch up because the quality and the absolute bar lowering the printers from Bambu labs have done.
QIDI and the new Creality printers are already way better for it and we will hopefully and likely see more innovation from trying to dethrone them.
All to say I think the cheers are justified and worth it. And as soon as they are worth it I think people will stop.
Maybe someone can answer this for me. Why do Bamboo Labs printers always have that stair step effect on the top-curves (top of the benchy)? The prints always look so good but my 10 year old Maker Select does better in that one spot.
I would assume mostly from trying to speed up print time.
The benchy is a 16 minute print and it lets the quality be good enough for that. If you are slicing the files yourself it can be a lot better especially if you are setting slightly lower layer heights and slower speeds.
Not all prints have it.
But every single one I’ve seen in person does, not just the benchys. Maybe it’s something to do with default settings?
Yeah, I know people swear by print speed in some circles especially if they are printing stuff to sell and want to speed up print time as well and that’s a core selling point of Bambu Labs printers.
The default fast speed settings in the slicers to most people will be all they do. And it’s got a large user base.
Hey see lots of people answering other questions but not the one you really want answered.
The basic nozzle wiper included sucks.
I have now tested probably about 4 different options and it’s something that you will want to replace soon if you are doing consistent filament swaps in a print. The A1 mini scrubbers don’t work quite as well as you would hope, mostly being that they hit the build plate back tab usually from where the nozzle wipes at and can grab filament and create a clog in the tube. I’m really liking the one I have on my printer though it needs to be printed with at least PETG realistically or ABS or ASA, but the nozzle wiper that uses a piece of tubing did the best job of cleaning the nozzle just also flung tiny little specs of plastic all over.
Buy more build plates also, especially textured as that will let you print everything basically and even TPU without a release agent on the build plate. I also really like the extra LED strip light replacement.
I’m currently in the finalizing my setup stages of an X1 and feel like I am finally in just printing away stage if you want to compare.
