Everyone (and their mother) have been trying to convince me that I should use one of my less loaded servers to be a Fediverse node. However, all Fediverse software packages I checked only support being installed on complicated systemd + Docker machines. My servers don’t have either of those, because neither systemd nor Docker even exist on OpenBSD and illumos.
I know that it would be possible to manually install (e.g.) Lemmy, assuming that I won’t ever need official support, but I wonder why the world outside a limited subset of the Linux ecosystem is - at most - an afterthought for Fediverse developers.
How can I help to change that?
80/20 rule.
When you are creating something like Lemmy, where you want wide uptake, you need to pander to the masses.
The /r/selfhosted surveys show around half of self-hosters mostly or exclusively use docker. A significant portion of the rest can use docker if needed.
If you’re in the 20% that isn’t covered by the most common setup, then it can be frustrating. But supporting that 20% takes as much effort as supporting the other 80% (see 80/20 rule), and when things are new it’s just not where the effort should be focused.
So you have all those servers, but why can’t you install debian or ubuntu server on one of them?
You could also get a $2/month VPS and run it on that. Beehaw is run on something similar (though apparently $12 a month, but a lot more users).
So you have all those servers, but why can’t you install debian or ubuntu server on one of them?
I could. Personal opinion: Linux is frustrating to use for me, and I prefer my servers to bring me joy.
What pain points do you find with Linux? How does OpenBSD differ?
This question is not as easy to answer as it seems.
Eleven years ago - that was before systemd - I was still using Linux on one of my desktops (Fedora) and my only server at the time (Debian). Independently of each other, both systems refused to start after an upgrade, so I had to replace them; on the desktop I ended up with Windows for a long time (in the meantime I’ve switched to macOS), on the server a FreeBSD worked first. From FreeBSD I later migrated to OpenBSD and illumos, all three systems have their own merits and solve problems that the other systems have.
As to the “OpenBSD vs. Linux” question, I’ll be brief:
- OpenBSD just works. No need to be careful during installation, no surprising problems with the init system after an upgrade.
- OpenBSD’s man pages are exemplary, Linux could take a leaf out of its book.
- OpenBSD largely adheres to standards. The GNU tools do not always do so. This is a pity, especially with the C compiler.
- Because the OpenBSD team maintains a complete system and not just a part of it, OpenBSD does not look like a patchwork, but is self-contained, which also has positive effects on security. OpenBSD itself advertises its good security statistics, not entirely irrelevant for servers.
- sysupgrade is a great tool that has no equal.
I think this list could be continued.
Thanks for your answer, being fairly out of the loop on all of this it’s quite interesting to hear. I’ve also experienced a number of upgrade pains. I’m quite diligent with storing important data external to the OS, but it still sucks when the only real option is to nuke the drive and install again.
I wonder why the world outside a limited subset of the Linux ecosystem is - at most - an afterthought for Fediverse developers.
I hate to break this to you, but OpenBSD is an antiquated OS masquerading as a modern one, and the OpenBSD’s lack of willingness to support modern standards results in the difficulty you’re having.
OpenBSD feels like it’s been duct taped together for decades. Anything “new” seems to just be, “sorry, not possible.” The OpenBSD kernel doesn’t support WiFi 5GHz. The OpenBSD kernel doesn’t support even the minimum subset of isolation features in order for Docker to function properly. Why? Because OpenBSD refuses to add these features to their kernel. There are very likely other syscalls and basic features any given open source projects needs, even if it’s not being run in Docker, that simply could not run under OpenBSD due to the very limited kernel it provides.
You’re upset because open source projects don’t support a platform that is old and developer-hostile. Turn your frustrations on OpenBSD - these projects would gladly support OpenBSD if they could.
I hate to break this to you, but OpenBSD is an antiquated OS masquerading as a modern one, and OpenBSD’s lack of willingness to support modern standards results in the difficulty you’re having.
Ok, let us assume for a moment that “modern” is the same thing as “great”: why do people still use Linux’s terminal, which emulates an actual 70s line printer, although there have been superior input capabilities since the 80s?
That’s irrelevant to this discussion. I was talking about OpenBSD’s lack of kernel features and driver support.
As for the Linux vs OpenBSD terminal comment, I feel like you’re grasping. What does OpenBSD’s terminal do better? We have had augmentations on top of the Linux terminal for years, adding things like auto complete and syntax suggestions that the 80’s could never have dreamed of.
Docker is used by a ton of projects and makes installation very easy in most cases
I’d highly recommend moving to a different distro that has docker
There are no OpenBSD “distros” with Docker.
The ever-changing landscape of new software.
I took a look at the manual [Lemmy] installation and it doesn’t seem to terrible… a few scripts and you can get updates, even…
I’m with you, tho; while I run a few services on Docker, ansible and the like - I prefer to spin things up in a normal filesystem that I can look at, touch and see operating.
We’re continuing to move away from the norm… UGH.
- pAULIE42o
- . . . . . . . . . . .
- /s
I have set up my Mastodon and Lemmy instances on my VPS using YunoHost.
On the plus side, it makes setting up server software ridiculously easy. It took me about an hour with each app.
The downside is the packages are community-supported, and often run a version or two behind the official release. For example I’m still on Lemmy 0.16.7. Still, I think it’s a great option if you want a more hands-off experience.
@tux0r have you seen Honk? It seems to be very easy. I’ve heard it works well if it’s what you want. https://humungus.tedunangst.com/r/honk
I did! And indeed, it looks like a very straightforward solution. :-) Currently experimenting with it.
Ugh, I wanted to make a few sublemmys but if it’s that much work, forget it. One thing that’s lacking around here are the shitposting subreddit equivalents. r/Copypasta, r/shittyaskreddit, r/okbuddyretard, that kind of thing.
Exactly, bring in the shitposting and porn subs and Lemmy will flourish.
If i can get it working I’d love to get an NSFW Lemmyverse set up. I miss my kink subreddits
Porn is kinda difficult. There are probably few people who want to moderate and more importantly be liable for pornographic content hosted on their servers. Many Hoster also explicitly forbid adult content.
Not impossible but someone would have to do it ^^
I could also totally see something like
naughtyverse.xxxas domain name.Will probably be defederated though.
Right. Lemmy would need at least an option for admins to not show content from certain instances in the All feed. And overall more sophisticated tools for moderating remote content (e.g. side wide mods that aren’t as powerful as admins but still can remove federated posts)
As far as I understand, you can make a new community (“sublemmy”) on any server, it will be federated.
You can only create a community on the server that you’re on, but you could just make another account and then appoint your account on the foreign server as mod :)
Lemmy.ml lets every user create communities
That’s not accurate though is it? Community creation can be enabled/disabled from the owner of the server, but there are some servers that allow it. For example: I’m on sopuli, which is not my server, and I’m able to create new communities.
sorry my explanation was bad. I meant you can create a sub on the server that you’re on. Afaik only beehaw disallows this.
The vast majority of servers run Linux and the simplest way to deploy services is with containers. Unix and Windows are much less supported and even running outside containers is fading away.
If you are interested, it may be simpler to spin up a small Linux VM.
Most of these projects are FOSS, so you have two options. Either ask the devs for OpenBSD support (but try installing everything on OpenBSD to see what goes wrong). Or try modifying the program yourself to add OpenBSD support.
Developers of these projects often target Linux, since it is by far the most used server kernel/OS. *BSD is not nearly as common.
The only way to potentially change that industry wide is to have enough people stubbornly use *BSD and help implement *BSD support for Linux specific tools they use.
Official support is often only provided with a docker setup as it standardizes bundled libraries and other needed blobs. This makes it easier to support many Linux distros.
Not that I wouldn’t want a Lemmy server to be easier to host and set up, but perhaps the difficulty is one of the things keeping troll and bot servers out in addition to good and common sense moderation.
Never underestimate 4chan.
But there are already a bunch of troll servers? Someone even deployed @[email protected]’s favourite attack that one time.
I feel you, I tried to install lemmy on the server on which I already run 7 other services (Matrix, PeerTube, my website with rails, Mastodon, another three websites with PHP, Nextcloud, Rainloop, some static HTML websites, and probably more). It’s a really small server so not much resources left but everything is working fine sharing one instance of Nginx and one instance of Postgresql.
Lemmy also uses Nginx and Postgresql so I thought great, let me reuse those. But nope, after 4 days of trying I had to give up and get a new Server just for lemmy. I tried the install from scratch, there lemmy would just not compile. Then I tried to reuse the docker-compose but to connect the existing Nginx and Postgresql but nope, Postgresql didn’t want to work with it because of a extension which was installed but somehow I couldn’t get it to work. And then Nginx with the example config file didn’t work at all.
Anyway on the new server it almost worked, the only thing which didn’t work were the websockets because the example didn’t set up anything for them. But I figured this last part out for myself and now I have to pay 5 EUR more each month to run Lemmy.
It’s “annoyingly hard” because you’re not using modern tooling. If Docker is unavailable on your preferred OS, then that OS is stuck in the past. Simple as that.
Docker makes it easy to install a program, including all its dependencies, in a repeatable way. Since you’re familiar with BSD, it’s similar to jails except with better isolation, fewer security holes/issues, and the software you want to run is preinstalled. Docker containers are essentially mmutable which makes upgrades easy - just throw away the old container and replace it with the new version. (persistent files are stored separately, in “volumes”)
You can of course manually install the same software by looking at the Dockerfile and manually performing the same steps, but there’s no guarantee that it’d work well on an unsupported OS.
That’s an interesting question. The percentage of servers (with the exception of routers, and other consumer appliances) that run OpenBSD (and variants) is actually extremely low when compared to the amount of servers running Linux. That being said you CAN set it up yourself, rust can easily compile to a binary that works with openbsd by using the target x86_64-unknown-openbsd.
As another commenter said here, *BSD is very far behind the developments of Linux, when compared to developer experience. And realistically, unless you’re a huge organization that can dedicate a team of engineers just to manage your system, perhaps because your business is one of those antiquated companies that hate the GPL, or you’re someone who likes getting into the weeds, there is no reason to ever use *BSD in a modern system.
And realistically (…) there is no reason to ever use *BSD in a modern system.
In my very personal opinion, there are a few not entirely unimportant advantages to using OpenBSD over Linux (and I suppose users of the other free BSDs have similar lists, but I no longer use any other free BSD):
- Culture. Basically, “shut up and hack”. Not wasting the time of project members with dissolute thoughts about social interference, but devoting themselves exclusively to improving the technology so far, leads to the fact that (much like NetBSD) all sorts of technical achievements came out of OpenBSD, including OpenSMTPD, OpenSSH and LibreSSL. Linux to me often seems more like a support group than a technical project.
- Predictability. The Linux community seems to constantly need new completely different approaches to everyday things. The systemd debacle with numerous reports of computers no longer starting (or shutting down) is not yet over, and there is already debate about the now-but-really future of the desktop. Many Linux distributions do not know anything like an “upgrade”, the normal approach to a new version is “download the installation DVD and start it”. In OpenBSD it is essentially three commands (
sysupgrade,reboot,sysmerge) - and it has never happened to me that after rebooting I was suddenly sitting in front of a completely different system. Yes, all this may not be cool - but predictability seems to me to be a not entirely irrelevant feature (also and especially for large companies). - History. Linux is a clone of Minix, which is itself essentially a clone of BSD, which was not yet free software in 1991. You might as well use the original, right? ;-)
edit: See also my previous answer for further advantages.
If 386BSD had been available when I started on Linux, Linux would probably never had happened.
The GPL licence is not a free licence, rather the opposite. But let’s assume that the licence debate is actually relevant: Why should a company that needs to make money selling software be “antiquated” simply because (for example) some of its algorithms are trade secrets?
Indeed, each system bears its distinctive advantages and drawbacks, and the optimal choice often hinges on the specific requirements of the task at hand. Nonetheless, I believe that OpenBSD’s utility is limited in contemporary scenarios.
Culture
It’s undeniable that OpenBSD has spawned important technologies under its “shut up and hack” mantra, cultivating an environment conducive to technical breakthroughs. Conversely, the Linux ecosystem too has been a breeding ground for major projects, Docker and Git being just a couple of examples. The ethos within each community can differ considerably, contingent upon the project or distribution. The widespread popularity of Linux may attract a varied spectrum of users, some less technically adept than the typical OpenBSD user. However, that doesn’t mean it’s short on technologically adept contributors.
Predictability
I’ve chosen to make peace with systemd, seeing it as a necessary compromise, as it has become the preferred choice amongst the developer community. Unless one fancies rewriting systemd .unit files each time something needs to be installed (which I don’t), the practical choice is to work with it.
Concerning the upgrading process, many Linux distributions today offer smooth upgrades without necessitating a complete reinstall. Your encounter may rely on the particular distribution you’re using. Perhaps it’s been a while since you last used Linux. I haven’t come across a distro that requires a complete overhaul in quite some time. Rolling release distros are now increasingly prevalent and are even suggested for novices.
With nixos, which is my distribution of choice for the foreseeable future, I have an attribute that your OpenBSD system lacks: reproducibility. I can transfer a handful of configuration files to a brand new computer and replicate my system precisely, encompassing all my installed packages and configurations, including those in $XDG_CONFIG_HOME. It will literally recreate the same exact environment.
History
And both of them are inspired by Unix, what’s your point? :P
Why should a company that needs to make money selling software be “antiquated” simply because (for example) some of its algorithms are trade secrets?
I think we’re not gonna agree on this, but I believe that all code that matters should be FOSS, there is no reason for a company to keep their algorithms as trade secrets, and if anything being open source can only improve the world, not hinder it.
Unless one fancies rewriting systemd .unit files each time something needs to be installed (which I don’t), the practical choice is to work with it.
The last Linuces I deliberately played with :-) were Gentoo and Void, both being non-systemd distributions by default. The point is that, if Linux was about choice (at least that’s what I’m told rather often than not), a particular init system should not be a component on which other components depend.
At least none of the services on my servers demanded systemd just yet. Maybe I’m a minority.
I can transfer a handful of configuration files to a brand new computer and replicate my system precisely, encompassing all my installed packages and configurations, including those in $XDG_CONFIG_HOME. It will literally recreate the same exact environment.
Sounds like a glorified rsync to me. I can imagine how this could come in handy if you have a whole set of identical machines that should serve the exact same purpose. I never had this situation in my own environments yet.
And both of them are inspired by Unix, what’s your point? :P
The D in BSD means distribution. BSD was Unix until the early 90s. Admittedly, today’s BSD is quite a different piece of software than 4.xBSD, especially given that both macOS and OpenBSD started with (a version of) it.
I believe that all code that matters should be FOSS
So do I, and the BSD license is a FOSS license. That does not necessarily mean that you are allowed to sell my code - or that I must not sell mine. Nobody said that FOSS requires “free of charge”. And if you spend quite a lot of money, I’m even sure that Microsoft will gladly sell you the Windows code. I a way, all code is free - it only depends on your bank account.
The point is that, if Linux was about choice (at least that’s what I’m told rather often than not), a particular init system should not be a component on which other components depend.
I mostly agree with this, but there is nothing I (or anyone) can do to change that without significantly hindering my user experience, and the benefits are minor. That’s akin to saying that you prefer gopher as a protocol, so you won’t use HTTP. Gopher is better according to some, but the world has decided on their protocol of choice already, there is no reason to fight it.
Sounds like a glorified rsync to me. I can imagine how this could come in handy if you have a whole set of identical machines that should serve the exact same purpose. I never had this situation in my own environments yet.
Come on man, that’s not what it is, I may have explained it wrong, but imagine being able to define the entire structure of your OS (including every tool installed, with your preferences) in a simple config file.
So do I, and the BSD license is a FOSS license. That does not necessarily mean that you are allowed to sell my code - or that I must not sell mine. Nobody said that FOSS requires “free of charge”. And if you spend quite a lot of money, I’m even sure that Microsoft will gladly sell you the Windows code. I a way, all code is free - it only depends on your bank account.
I knew we weren’t gonna agree on this, haha.
I agree on one thing, free doesn’t mean free of charge. It’s my firm belief that one ought to contribute financially to open-source projects from which one derives substantial benefits. However, I also maintain that code should be open and accessible to all, without any monetary charge.
In the case of windows, for example I would want the code to be open and available to anyone. I would even accept a situation where the code is completely available, albeit under a highly restrictive license. This license could permit you to study and learn from the code, but prohibit any actions such as creating your own version or selling it. This way, open-source principles are upheld, while Microsoft’s rights are protected.
Gopher is better according to some, but the world has decided on their protocol of choice already, there is no reason to fight it.
Yet, Gopher is still relevant. There are more than two operating systems for a reason. I know, “Worse is better” (I presume that you know that essay). People who need more than macOS and Windows are a minority. Which minority inside that minority is “the world”?
imagine being able to define the entire structure of your OS (including every tool installed, with your preferences) in a simple config file.
That sounds useful, indeed.
there is no reason to ever use *BSD in a modern system.
Pfsense/OPNsense has been running on my router for… I can’t even remember how long ago I built it. The BSD family of OSs are great pieces of opensource software and they absolutely have niches they excel at. Use the best tool for the job, and don’t fall prey to marketed loyalty.
well I did say:
with the exception of routers, and other consumer appliances
but definitely, use whatever tool you like
There is no “official support” for this. Is FOSS. You are on your own to run it. If my instance breaks I can’t just run to the Devs of the project to help fix it. It’s on me.
It’s a project run by two people. And to be fair to them they chose one of the most OS agnostic methods to help build it. You don’t need to use a specific distro, just tools.
You can port what’s needed over to BSD and do a PR to merge it, even if it’s just a BSD_Jails.md file. But it’s gonna take some know how.
Building a Lemmy instance on pretty much any Linux box is fairly easy and well documented though.
On a personal note, imho it does no good to be an OS evangelist. It’s as true for MacOs or Windows as it does for BSD. Use a tool for its strengths. I have BSD running my firewalls and even some storage, Linux running stuff, windows for things it excels at, and macos for stuff it works for.
@tux0r Mastodon is well-documented and I was able to set a node up in an hour or so, don’t know about OpenBSD tho
Mastodon wants Docker.
it likes it but not needs it, an OpenBSD dev has your back https://github.com/qbit/mastodon_openbsd
Last updated in 2018… probably unsupported for current versions?
no it works for the current version but you need to check your playbook vars to just get the new tarballs. If you want to see it in action PHessler runs a node at bsd.network that runs on OpenBSD in vmm on OpenBSD.
Good to know, thank you.
From that site:
Make sure curl, wget, gnupg, apt-transport-https, lsb-release and ca-certificates is installed first
lsb-release does not exist outside Linux.
@tux0r https://docs.joinmastodon.org/admin/install/ This is the standalone guide: https://docs.joinmastodon.org/admin/install/
From that site:
Make sure curl, wget, gnupg, apt-transport-https, lsb-release and ca-certificates is installed first
lsb-release does not exist outside Linux.
