Since switching to Proxmox I’ve noticed an issue with intermittent network connectivity on my VMs. I’ve narrowed it down to the realtek based PCI NIC (Rosewill RNG-407-Dualv2) I currently have installed. Basically when I see a ton of these in my syslog:
Dec 14 13:55:37 server kernel: r8169 0000:09:00.0 enp9s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
It means it’s time to reboot. I did some digging on it and it appears to be a kernel driver issue. Unless someone in this community has encountered this and knows of a good fix (other than rebooting) I’d rather just ditch Realtek and replace the NIC.
Can anyone recommend a 2 port PCIe (x1) card that has good driver support under Linux and (hopefully) won’t cost me a small fortune? Bonus points if it’s 2.5GbE capable.
You must log in or register to comment.
ebay has cheap intel gigabit nics which i havent had issues with
No one ever got fired for using intel nics, it’s worth it for the time it’ll save.
Tell that to Red Rock Canyon adopters
I think anything with an intel chip is golden. I have single port intel gigabit nics in all my boxes and zero issues
For older Gbit intel NICs have a look here: https://forums.serverbuilds.net/t/demystifying-intel-pro-1000-quad-port-nics/2401
Especially the virtual nic support used by VMs is only optimized on some of their chipsets.
I hear the latest two 2.5gbit capable generations from Intel have some stability issue though, but I didn’t have the chance to dig into it. Probably still better than Realtek NICs though.
That’s a useful post. Thanks.
We use mostly Qlogic/Broadcom adapters at work, but i think it depend mostly on what hardware you use. Check compatibility lists
Yeah i didn’t read thoroughfully your post and my suggestion might not be the best recomendation for your case…
deleted by creator
Intel or Mellanox are both pretty solid.
New Lemmy Post: Non-Realtek NIC Recommendations (https://lemmy.world/post/9572478)
Tagging: #SelfHosted(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md
