Canada’s Westminster system the PM also gets Right Honourable as an title, going to assume it’s similar based on some googling so you could totally use The Rt Hon Sir Keir Starmer, but I’ve very very rarely seen news media use full titles outside of reporting on ceremonial activities.

The task bar change annoyed the hell out of me, get why people were so upset with w8 now, I’ve been a top taskbar person since xp, small gripe but it jarred me, at least the hotkeys didn’t change, the hiding of context menus irks me too, if you are going to do things like that, let me toggle it off. Windows has been getting increasingly frustrating to power users, more annoying to me because winget is solid and windows terminal is actually really nice.

Same boat, work is windows, I’ve found it easier to work on a linux VM or totally in wsl with a chunk of tasks, had grief with docker too which to be fair, I’m pretty sure most of these issues are because of group policies, company i work for bought tech firms but the central IT is setup for business users so things like local admin I had to fight for weeks to get just to install the azure CLI.

Totally fair, on the tip side I’ll totally admit I’ve modified some to fit in my older Weller station I use as a dedicated heatset iron, it has heater cartridge that’s semicircular so the tips run the length of the iron. That said, I mainly do through hole and connector soldering, I’m not doing a lot of precision work, pretty much grabbed it because I was familiar with the iron and knew that it’d be comfortable for me. Think I use my heatset iron the most out of anything tbf, got me thinking about tools to recover inserts, that’d be super nice to have.

Oh for sure, totally appreciate that Weller is pricey, and I’d totally expect good tips on a knockoff to perform well. For me it’s going to come down to preference, wish I could try a bunch of different irons before buying, I at least had experience with wellers so I knew that I found them comfortable to work with and I’m not doing a ton of surface mount or fine stuff so meets my needs.

I’ll suggest Weller irons as a solid alternate as well, pretty much the only irons I’ve used in the last decade or so, mainly because the job I soldered in a lot used Wellers, had some lower end variable ones beat to hell in field bags that still run perfect today (actually my dedicated insert iron). I have a WE1010NA that I use now and it’s a solid tool.

100% a title that would struggle with full controller, for me it was cities skylines and rimworld. Also played a lot of warframe and spec ops:the line with mine, being able to have actions trigger at different points of the trigger pull was interesting, had a profile I grabbed for shooters that’d enable gyro aiming at the last bit of your trigger pull for fine adjustment and seriously, it works extremely well once you get used to it. The pads also supported osd rotary menus for hotkeys which was probably what the left pad got the most use out of, had the ability to set different behaviour too using mod buttons are by touching the rim of the pad. Also the haptic feedback on the pads was interesting, did a lot to make them feel more real, seriously had a really powerful piece of hardware with the og steam controller.

Totally was, it didn’t have rumble for battery life reasons, but didn’t miss it much at the time, barely used the rumble pack on the n64, think I got mine at EB games to try out the OOT secret hint feature (it’d buzz the pack if you were near a hidden secret), feedback has come a LONG way since then in terms of immersion.

I really liked the wavebird for the gamecube, unfortunately mine went into the aether on my last move, got bluetooth adapters to pair modern controllers with it but the wavebird was really cool at the time, was really amazing to not have to be tethered to the console and it being first party, though at the time the madcatz stuff was decent.

For recent controllers, I’ve been using a knockoff 360 controller for moonlight recently and after a lot of back and forth I really think MS nailed the controller setup back then (OG Xbox being decent but not a preference, I hated the duke, s controller was solid though), I like the xbone controllers as well, but IMO they’re just iterations on the 360 controller, easily my preference as an all rounder controller layout.

I have a steam controller, used it for a while but it’s been some time now, had some really great ideas, I’d totally go for an updated steamdeck style layout on that, probably a second for me.

I’ve had so much drift issues with ds4s that I personally don’t reach for a ds4 or dualsense for non playstation games, I like being able to swap batteries and the Xbox/Steam controllers all seem to have way better battery life in general, I keep a stock of rechargeables around so not generating piles of waste.

I found Freecad has become fairly intuitive if you already have traditional parametric cad experience, there’s definitely a few quirks but generally super easy to adapt to if you come from solidworks, inventor and the like, trying to convince my dad to give it a try as he’s been getting back into design since retiring and he’s been paying for a solid works license. Personally use ondsel but mainline freecad is totally usable.

Edit: Yeah, just use the RealThunder fork, was running into the Topological Naming Problem a few times today which was frustrating me on top of a few other (probably self induced) annoyances. I was using the mainline freecad before with ModernUI Workbench as a plugin which gives you ribbon menus, I actually prefer it over the UX changes on the most recent Ondsel release.

Kinda sounds like combine infill layers in prusa/super slicer, that setting will have it do the perimeters as per normal but do infil at 1/2/3 etc layers, so 0.2 layers would get infill every 0.4 at 2, so it’ll print the perimeters and anything that can’t be merged, go to the next layer and do the perimeters and chunky infill, I use it to save time and I haven’t noticed much difference in functionality.

Yeah I recall the USAF deploying a ps3 cluster years ago

I remember one of my engineering profs describing Midgley as the most environmentally destructive organism ever, Dude also was involved in the creation of freon.

Could have a bot that links to a git wiki, or even just a sidebar with knowledge base stuff would be nice for that.

Totally get you, I swapped my prusa’s hotend for a stealthburner as well, they’re super nice to service, especially with the 2 part PCB, but having the entire assembly mounted from the front is fantastic.

Stealthburner ended up fixing your clog issues entirely?

Fingers crossed. There’s hats you can get to power the pi off of printer’s 24v supply, considering doing it on my klippered mk3s and switch that over to using a SBC instead of the laptop.

If you can swing it, definitely worth printing a spare set for the stealthburner + cw2, just in case you crack anything during assembly.

You’d think right, anecdotally when I was meaaign with undervolting on my desktop, you’d get instability or crashes at the limits without useful errors. Could think maybe the processor isn’t getting enough power and that’s causing instability? Found a klipper thread that about losing connection with the mcu which totally can show up as an EOF error.

How are you powering the pi itself? Wondering if the wakeup draw from your screen is enough to make it unstable, 4 I believe having higher power drawn than the 3 if you’re using the same power supply. Pi isn’t oced either?

Quick Edit: I run my v2.4 on a lepotato with oodles of usb attachments (camera, multiple mcus, wifi and a screen. Replacing the mcu connections with a usb-canbus bridge when the heatwave ends) but with it connected directly to a meanwell 5v5a PSU into the gpio header, have never had communication issues to the octopus pro I use. Skr mini on the other printer is connected to a laptop host so it definitely has enough power, did have some odd issues with the skr mini and having an accelerometer connected to the spi header on boot and separately the 24v supply becoming loose that I fixed by crimping ferules onto the supply wires when I added a molex connector to make taking the printer out of its enclosure easier.

Yeah, had that happen a few years ago, thankfully there was a consistent status attributes in the response that I could use but still, annoying

Yeah that’s how I did the mockup, I use superslicer on one printer and prusaslicer on the other so was hoping I could do something that’d be able to port between them easily.

On that thought, superslicer being based on prusa slicer, wonder if I could just import the project like I’ve done with filament profiles. Thanks!

Yeah I used inkscape for the image dxf, good thought on the text. I’ll try it in freecad again, had it die on me a few times so I started looking into alternates, thanks!