![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/44bf11eb-4336-40eb-9778-e96fc5223124.png)
Empty on Sync.
She/They
Empty on Sync.
Hatsune Miku? May not be the same thing your kiddo is in to, but boy is my very gay nephew obsessed. It is entirely adorable. I even added “CV01” to the ssid of the WiFi because I am the cool aunt.
Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.
Add a /etc/systemd/network/99-default.link
with the below contents.
# SPDX-License-Identifier: MIT-0
#
# This config file is installed as part of systemd.
# It may be freely copied and edited (following the MIT No Attribution license).
#
# To make local modifications, one of the following methods may be used:
# 1. add a drop-in file that extends this file by creating the
# /etc/systemd/network/99-default.link.d/ directory and creating a
# new .conf file there.
# 2. copy this file into /etc/systemd/network or one of the other paths checked
# by systemd-udevd and edit it there.
# This file should not be edited in place, because it'll be overwritten on upgrades.
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.
ip link
should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
You will need to edit your /etc/network/interfaces
file so the correct card is used.
/etc/network/interfaces
, just in case you mess something up.sudo vim /etc/network/interfaces
(or whatever text editor makes you happy)
It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF
you identified above. source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface enxAABBCCDDEEFF inet manual
auto vmbr0
iface vmbr0 inet dhcp
#iface vmbr0 inet static
#address 192.168.5.100/20
#gateway 192.168.0.1
bridge-ports enxAABBCCDDEEFF
bridge-stp off
bridge-fd 0
sudo systemctl restart networking.service
Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.
sudo systemctl status networking.service
will show you if anything went wrong and hopefully show that everything is working correctlyip -br addr show
should show that the interface is up now.lo UNKNOWN 127.0.0.1/8 ::1/128
enxAABBCCDDEEFF UP
vmbr0 UP 192.168.5.100/20
At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.
Fuckwit is my go to. Or “Too stupid to breathe.” Or bring out some Linus Torvalds, but honestly Trump doesn’t deserve to be graced by that mans insults, as awesome as they are from a “JFC dude, that is going way too far”, except Trump would actually deserve them unlike the poor kernel maintainers.
I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames
Basically, by doing this, your nic cards will be forcibly named using the mac address:
#/etc/systemd/network/99-default.link
[Match]
OriginalName=*
[Link]
NamePolicy=mac
MACAddressPolicy=persistent
Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.
Hey, you ok? I am not ok today, but I definitely don’t want to fill my skull with bullets. Go wash your sheets/bedding. For whatever reason, clean sheets are the best.
I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.
Thank you. I admit I don’t use Firefox right now due to issues I ran in to during my trial run earlier this year. Once the battery drain issues are fixed on the Android client I can at least switch back to it on my phone.
My company surprised me last week as we did an install and things didn’t work right in Firefox for the customer. My boss and the team are committed to fixing it and doing better on browser testing. There was not a moment of hesitation on this decision. We of course told them to use Edge, Safari, or Chrome in the meantime, but by no means are we throwing it on the bottom of the “fix” pile. Team is almost done and ready to send to QA. Super proud.
It looks like with multiple power cubes you can break it up. My favorite thing about the switch is the separate joy cons. This is far far far less painful for me to hold than traditional controllers. If this worked on Linux, Mac, PlayStation, and my Steamdeck, I might try it, as long as I could return it if it doesn’t work out.
I struggle with buttons in general. My palms are too small so I can’t wrap my hand around them very well. I have to death grip with my palm or I drop it, but I am constantly shifting around as my fingers can’t reach certain things easily either. The off-axis joysticks on an Xbox controller is a no go as I have to hold the controller rotated a bit which means that up isn’t up. I do much better with PS5 controllers, but still get a lot of pain in my hands if I play too much.
Been there. Done that. FML on searching for programming help some days. Versioning is a nightmare as the way you “used” to do things is no longer relevant and the rest of the results are some asshole saying it is a duplicate question that was answered 10 years ago…that is no longer fucking relevant!
Sorry. Yesterday sucked. I hope today is less frustration and more things working like they are supposed to.
I use this on all on my Pis. It just works. I like the text config file for headless installation and how you can even add scripts to run on install too.
I get confused every time I install a distro and man isn’t installed by default. I guess I get the bare minimum philosophy, but it throws me off every time. First thing I install is vim, man, git, and probably a couple other things I can’t remember right now.
I do like a decent man page that has examples for us dummies and I have found that they have improved a lot over the years.
Like other posts, Factorio. You will lose sleep. Set timers…
Proton and Vulkan make most things easy-ish if you are using Steam. Note that there is a little properties button on the game page that you probably need to use to force it to use Proton so it will install. Proton DB is your friend. Lutris + Wine is pretty good too. Proton is just Wine with enhancements.
You may find Helldivers a lot of fun too, especially if you can play with friends. It is suitably ridiculous in the best way and is sort of human vs aliens/robots. All of the humans (us) play on co-op teams to bring Democracy to the universe. There is a game master from the company that makes it that is leading the war against us. Like I said, suitably ridiculous. Most of my friends are playing it nightly and it will be a big part of our LAN party this weekend.
Ok. I tried Firefox for about a month on my Android phone and Mac, but unfortunately had to go back to Chrome on both. I don’t really know what to do at this point. I run enough firewalls and ad blockers that using Chrome has never particularly bothered me from a usability standpoint, but I get the point everyone is trying to make. However, I also don’t want to spend weeks of my life fighting to get yet another open source program to work the same as the “other” program, or find some substitute that I can live with.
I used to use Firefox when I was a kid and loved all of the extensions. However, it seems severely lacking now. I tried to find something to give me group tabs, and found old abandoned projects or some tree thing that made 0 sense to me. I saw an article I think explaining that it is coming? I don’t understand why a feature like this is missing when it used to exist a long time ago. Seems like basic functionality to me. Also, why is the tab bar so big? It takes up a lot of screen real estate.
The thing that killed it for me was the lack of PWA support, which is how I have used Outlook for around 6+ years. I fought with the extension for a while and things sort of worked on and off for a few days here or there, but half the time it would open emails in the main browser anyway. Once it got to the point where Outlook was completely blank and refused to load at all, I gave up. I could never get it to work again. I hoped I could maybe setup the PWA to just be in Chrome or Safari, but it just opens it as a tab in Firefox anyway. I tried, but I am not going to spend hours fighting with it anymore at this point and it would be nice if it was built into the browser instead of a random extension.
It was a better experience on the phone, and I like the bar on the bottom, until I realized it was draining my battery. I found a thread of users complaining about it for the last few months with no fix. I don’t even use the sync feature, but that supposedly is the culprit? Phone kept dying and I barely used it. Looked at the battery usage screen and there it was, almost the top item. I would love to use Firefox on Android, but not at the expense of my battery. Sorry.
I usually look at their GitHub or what have you to see if there are packages or instructions there. I have been able to solve most issues this way. Otherwise I see how much of a bitch it will be to compile from source. Depending what it is, I also check to see if there is a docker image instead.
Kung Foo Hustle is just amazing. I need to get that later and watch it again.
A potentially lesser known movie is ‘Kimi’. Not your typical example, but watching her get past her trauma enough to kick ass in the end was great.
This. Ignition isn’t that expensive and is cross platform. You can even run it in docker. I understand wanting free, but when it comes to industry, sometimes paying a few bucks for less hell later down the line is worth it.
I gave Manjaro a shot recently and Bluetooth was 90% unusable for anything but my mouse. Keyboard? Nope. Headset? Nope. Other headset? Nope. Bluetooth speaker? Nope. Unfortunately, it is a brand new Intel motherboard, so I can’t even get WiFi as athk12 or whatever isn’t really done. I was shocked I could get bluetooth to work at all. Sound wasn’t that great through a USB headset either, but then I could at least hear people. For me, I can really only use trackballs now and the USB port on the mouse is for charging only. Bluetooth compatibility is very very important to me and it still being shitty on any system in 2024 blows my damn mind.
Only other potential issue would be something with how Proxmox is doing passthrough, but I had just as much trouble pairing with Debian underneath through the terminal as I did with the Manjaro VM. On another note, the GPU passthrough is amazing and I had a good time playing games for the first time on Linux. This machine was never intended for gaming, but I thought it would be fun to take a server to a LAN party. Sliger case for the win! Just a 3U.
I had to change mine to mac address naming on my proxmox server after the second time the name changed due to a GPU or SSD being added. It was kind of like, so what, if an SSD dies suddenly or I have some issue with a device you are going to rename my fucking nic card again while I am trying to troubleshoot? Absolutely deranged.