Brb uploading a 5GiB file from /dev/urandom to make sure there isn’t a byte of space left in OneDrive for them to do this to me.

The screenshot doesn’t show any version change to signal - the version number is the same, so I was just answering why you might see an update like that since I thought that was part of your question.

Those might be flatpak “refreshes”, which show up as “updating to the same version”. As described by a flatpak maintainer, sometimes an app or runtime gets updated without changing the user-facing version number. I assume that’s what you’re seeing here.

Even better is your monthly streaming bill being $10 in electricity and a $5 VPN subscription (if you’re in a country where your ISP sends angry letters and you don’t opt for Usenet instead)

My gaming PC is sticking with 10 for the foreseeable future, it’s my only windows machine and that’s because it’s a beatsaber and fusion360 machine and I don’t want to be bothered with fixing something when I want to get a workout session in or need to urgently design a part.

P.S. if anyone knows how to get fusion working in wine I’m all ears

I switched from Google photos to immich so I could keep my photos more private (self hosted on my own NAS). I still keep Google photos installed on my phone so I can edit photos (the editor is really nice to use). Every time I open it, it bugs me to resume backing up to Google. This week I found that it had started backing up to Google again although I don’t remember accepting so I had to go and clear out all the uploaded photos again.

I hate this. Even when I decline to back up it usually then nags me with a second screen asking if I want to do a one time backup. Like, no. I don’t want to send any of my photos to Google.

My approach in fusion is to start with the most complex profile shape and create a sketch on that dimension and then just keep removing or adding features using sketches on the other axes.

For example for your radio holder (the orange piece in your screenshot) I would do a top down sketch with 2 circles connected with 2 lines (making a pill shape), times 2 inset from that (to give you an elongated ring), then add a couple lines to get the C shape. Extrude that and then do a separate extrude of the entire outline (without cuts) and set the extrude offset to the height of the model so that the new body ends up at the bottom of the previous extrusion making a bottom to the part - and with mode set to join on the extrude, if they’re touching it automatically merges them (saves having to do an extrude + join and just does it in a single extrude).

For the holes I would make another sketch coming from the front and then use the polygon tool to make a hexagon, followed by the pattern tool on the hexagon to make the hole pattern (a neat trick for hexagon patterns in fusion is that you can select 2 adjacent sides of the hexagon as pattern axes even though they’re not 90 degrees, the pattern tool will nicely pattern the hexagons hexagonally instead of just making a grid of hexagons). Then selecting all the hexagons generated by the pattern and doing an extrude from that sketch in cut mode to cut the holes. (One downside here is that adjusting the pattern count doesn’t automatically adjust the selected hexagons, you have to adjust the extrude-cut to select any new hexagons if you edited the pattern to create more)

I hope that gives some idea on how to build up shapes - I haven’t really used any tutorials but just kind of wing it by trying to make my first sketch of a part from an angle where that sketch can take care of as much complexity as possible so the finishing touches can be simpler. (Ie, if you made that orange part from the side, the initial sketch would be a square and you would have to do a lot more operations to cut off material)

Did you make sure to stop network manager too? I think disabling it tells it not to start it automatically but I think if it was already running it may have stayed up and maybe it brought the interface back up.

That’s my only guess, if ip link shows it as down still then idk. NetworkManager also has its own Mac spoofing thing so you might have better success editing the properties of the network connection in NetworkManager and putting a new Mac in the cloned Mac address field. I’ve only used macchanger with netctl.

Has anybody made a matrix app that looks like a discord clone? That sounds easier since the federated rich text chat is already made, the current clients don’t really appeal to the discord crowd.

I actually just realized lineage 21 does this too - I didn’t notice because cropping a screenshot with Google photos seems to remove all the fields (I also have the build string and timezone offset). Which is weird because cropping an actual photo the same way - as you would expect - preserves all the notable fields like timestamps, phone model / lens info, and the same “Software” field which for my photos is just “HDR+ 1.0.commithashlookingstring”

That’s so weird, exif on a screenshot? Usually my quick fix to remove exif from something when I’m on the go is to take a screenshot of it. I’m on lineage 21 and according to exiftool there’s no exif data on my screenshots.

Yes it entirely depends on whether they store previously used usernames along with the date range it was in use (to tell apart multiple people who used the same username at different times)

We’ll have to see if any unsealed cases in the future support that they don’t keep those records like how they don’t keep IP logs, but personally their track record is enough for me to have confidence in the feature, especially since my “threat model” is primarily opportunistic hackers or spearphishers at most, not police or state / nation state level actors.

The idea is that you change or remove your username after someone else starts a conversation with you, so the username can no longer be used to subpoena your account details.

Put another way, signal is able to provide those 2 pieces of information to law enforcement based on a phone number. This helps you to prevent law enforcement having a phone number to ask signal to look up in the first place, assuming you change your username every time you hand it out.

They also hash the usernames that they store on your account which means law enforcement can’t ask what usernames are being used, only being able to ask for specific usernames which are currently in use.

I don’t think it’s completely true to say it’s not accurate in any way. You can still get a rough estimate based on the proportion of likes to dislikes coming from people with the extension installed, then extrapolate that out based on the public number of likes provided by YouTube.

Of course it’s not going to be anything more than a ballpark number, but being able to tell the difference between “almost nobody is disliking this” and “like half of viewers are disliking this” is super useful information. If nothing else it serves as a third party keeping a dislike count for users who installed the extension. They’re not claiming to access the real YouTube data, so I think it’s unnecessarily dismissive of what it does to call it bullshit.

Isn’t Miracast for sending video data? The thing I like about Chromecast is that the phone or remote app just tells the Chromecast where to load the media directly from, and then only sends playback control commands. That makes it a lot lighter resource wise because you don’t need to proxy the stream through a device like a phone that wants to go to sleep to save battery.

Note that the 2x10G is SFP+ not SFP. I was briefly confused. I have tons of SFP+ stuff but no SFP gear whatsoever

I think that text is from melroy, so according to him. From seeing his interactions in the kbin issue tracker I get somewhat of an egotistical impression of him, because he would often take an issue that has just been opened and not triaged or discussed what the best fix is, and he would open a PR with how he thinks it should be fixed, and it sounds like his frustration is that his hasty PRs weren’t getting merged quickly because people wanted to come to a consensus.

Maybe I’m just reading into it but it felt like he just wanted his name on something and it wasn’t happening with kbin.

Edit: I want to add that I don’t mean to shit on him as a dev or as a person - it’s possible that I’ve only seen a one-sided view of his interactions as a busy contributor who just wants to whittle down the issue list as fast as possible and that he’s got good intentions, and regardless he seems like a very capable dev. It’s just that based on my perusing of issues and discussions I’ve come across, it doesn’t seem fun to work with him to contribute, and if I were to treat the contributors list as a scoreboard and had the goal of having my name on as many commits as possible, I think it would be hard to tell us apart. I was just going to keep my thoughts about this to myself but I’ve seen some other people comment similar things in other threads about mbin so maybe it’s worth sharing my skepticism about mbin. Take from it what you will.

I always use VLC so I thought the meme was that it was one of those fake “codec not supported, go to this sketchy website” videos

Just want to second this - I use an Intel nuc10i7 that has quicksync for Plex/jellyfin, can transcode at least 8 streams simultaneously without breaking a sweat, probably more if you don’t have 4K, and a separate synology nas that mainly handles storage. I run docker containers on both and the nuc has my media mounted using a network share via a dedicated direct gigabit Ethernet connecting the two so I can keep all the filesystem access traffic off of my switch /LAN.

This strategy was to be able to pick the best nas based on my redundancy needs (raidz2 / btrfs with double redundancy for my irreplaceable personal family memories) while being able to get a cost effective low power quicksync device for transcoding my media collection, which is the strategy I chose over pre-transcoding or keeping multiple qualities in order to save HDD space and be flexible to the low bandwidth requirements of whoever I share with who has a slow connection.

What do you mean no? Everything I said is true - I’m just describing my firsthand impression. Nowhere did I say transparent aluminum is a type of glass? I was just describing why it feels heavier and colder than you would expect since it looks like glass, of which most are less dense and less thermally conductive compared to transparent aluminum, which is not glass but makes sense to compare to in order to convey what handling a piece feels like.