So many people here will go though great lengths to protect themselves from fingerprinting and snooping. However, one thing tends to get overlooked is DHCP and other layer 3 holes. When your device requests an IP it sends over a significant amount of data. DHCP fingerprinting is very similar to browser fingerprinting but unlike the browser there does not seem to be a lot of resources to defend against it. You would need to make changes to the underlying OS components to spoof it.
What are everyone’s thoughts on this? Did we miss the obvious?
I guess the hostname could be used to defeat MAC randomization if you use public WiFi like hotels, airports and coffee shops. You could probably identify repeat users if you cared enough.
But then your worry should be the security cameras not the WiFi, because that’s what’s gonna tie you personally to your device connecting.
Your router always knows your Mac address, no matter how you got your ip assigned. And yes, you can use it to identify the client - that is why it is there. This whole post is nonsense written by someone who doesn’t really understand what dhcp is or how it works. Long story short, don’t look for privacy on local Ethernet segment :D
Most modern operating systems randomize the MAC. DHCP does have extra fields such as the device’s hostname that can be used to counter that.
But as I said, that’s unlikely to be the weakest link. If you don’t trust the network you’re also likely in a public environment where people can just see you anyway.
[citation needed]
having the option to randomize the MAC is not the same as actually doing that. There are also a few downsides to random MACs, like captive portals not remembering you on public WiFis.
The default on android is to give every wifi network its own random but static mac.
Captive portals not remembering you between sessions is a huge bonus for captive portals with time limits.
that doesn’t seem to be uniform behaviour. but i think we agree on the merit. if you are this paranoid, you just don’t use networks where you don’t have control over the local segment.
[admin@MikroTik] > ip arp print Flags: X - disabled, I - invalid, H - DHCP, D - dynamic, P - published, C - complete # ADDRESS MAC-ADDRESS INTERFACE 0 DC 192.168.88.160 A2:35:xx:xx:xx:xx bridge 1 DC 192.168.88.159 F4:60:xx:xx:xx:xx bridge 2 DC 192.168.0.1 44:32:xx:xx:xx:xx ether1 3 DC 192.168.88.168 18:3D:xx:xx:xx:xx bridge 4 DC 192.168.88.156 70:BB:xx:xx:xx:xx bridgedeleted by creator
Easier said than done. Sometimes it’s not an option.
there is always an option. unless you are pressured by lets say some state authority or your employee, in which case your identity is probably well known and they don’t really need to spy on you through dhcp.
You seem to be forgetting that a lot of people use portable devices on other networks than their home one.
i am not forgetting anything. using your portable device on network other than your own is your free choice and if you are such control freak that you are afraid of being spied on through dhcp, you probably should not do that.
Wear a mask and sunglasses so you just blend in.
See the linked page
You need to say more than that about what your concern is, especially on devices configured for Mac randomization and other privacy features.
Aruba is looking at the dhcp traffic and inferring information about the device. The device is not sending all of this data.