• stoy@lemmy.zip
    link
    fedilink
    arrow-up
    19
    ·
    9 months ago

    What is your budget?

    In general try to go for Asus, they can mesh and are usually reliable.

    If you want something more advanced, look into Ubiquiti, though they will be more expensive, also read the reviews for the different components, some POE switches can get quite hot, so if you don’t need it try and avoid it.

    I am on Asus, and have had very little issues related to my router the last few years, but have been eyeing Ubiquiti lately…

    • ghashul@feddit.dk
      link
      fedilink
      arrow-up
      10
      ·
      9 months ago

      I can second the reliability of Asus. Mine is five years old now, and still going strong.

    • Draupnir@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      9 months ago

      Had an asus mesh system with three different routers for a bit. Worked really well! One of them died though so bought a refurb asus mesh system off Amazon for like $100. Great speed and coverage for a year now no complaints!!

    • ForgotAboutDre@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      Asus puts a lot of their advertised features behind accepting terms and conditions that have them harvesting and selling your data. You can not agree to it and still use the device. But many of the advertised features won’t work.

    • NeroC_Bass@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      I also second this. I have an Asus router setup with mesh nodes, and it has been running smoothly, especially since I’m hosting a plex server and occasionally multiplayer servers.

    • vzq@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      9 months ago

      The new UniFi switches are surprisingly good. Poe++ without breaking a sweat. I have some of their original line too. You can bake an egg on them.

  • ninjaturtle@lemmy.today
    link
    fedilink
    English
    arrow-up
    13
    ·
    9 months ago

    Running tp-link. So far no issues. Asus is good, tp-link gives you more features on the cheaper models than Asus like vlan if you want it.

  • ninjan@lemmy.mildgrim.com
    link
    fedilink
    English
    arrow-up
    9
    ·
    9 months ago

    My recommendation falls squarely on the Omada series from TP-Link. It’s their SMB (small-medium business) offering and its very wallet friendly for what it is. Though WiFi 7 stuff is of course not cheap if you want the bleeding edge. I suggest going with the EAP6 series with WiFi 6E. No need to buy the physical controller, instead DIY a router with opnsense or pfsense and the Omada software for managing the APs is what I recommend. You of course need a switch with PoE like TL-SG2008P. PoE is a game changer for making wiring up the APs easy, and I do recommend wiring them because then you don’t need to think about having a strong signal between the APs.

    Criteria being stability mainly, all consumer stuff is much more prone to the occasional drop and just plain wonky ness. Another criteria being upgrade path, the Omada stuff can easily be sold when you upgrade because they retain value pretty well (and you can find them used to start with as well). They also don’t ship with the bloat consumer devices come with. With features you don’t need and router+AP combo is fine if you’re in a single room apartment but it doesn’t scale to a multiroom setup well. I’ve used Asus “AI-mesh” and you really waste more money than you save in my experience.

  • astrsk@kbin.social
    link
    fedilink
    arrow-up
    9
    arrow-down
    1
    ·
    9 months ago

    Any WiFi 6 or 7 router in which you can install openwrt and set as a dumb AP connected to an x86 machine running OPNSense or openwrt itself. The redundancy and enhanced control are 10/10 worth it, along with security and stability.

  • tyler@programming.dev
    link
    fedilink
    arrow-up
    9
    arrow-down
    1
    ·
    9 months ago

    Don’t get a combined AP and router. Make sure they’re separate. That will get you a lot of quality just by doing that.

    • TheGalacticVoid@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      I feel like you’re conflating combined devices with consumer-grade ones. I’ve had pretty good experiences with Unifi’s all-in-one offerings.

      • tyler@programming.dev
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        That’s a good point. I haven’t used unifi’s combined devices. I was under the impression that the radio generally works better when not next to the router but maybe that’s old news.

  • Tikiporch@lemmy.world
    link
    fedilink
    arrow-up
    7
    ·
    9 months ago

    I had many wifi issues due to the layout and structure of my dwelling, and Unifi was the only setup that solved them. I started with my original Orbi (Voxel firmware) mesh setup from my previous home, but performance wasn’t where I wanted it due to the age of the devices. Then I tried the TP-Link w7200 sets from Walmart, but it didn’t meet my needs connecting a remote building on the property.

    Unifi are expensive, but I have no regrets. Even added their security cameras to my network when the old system needed replaced.

    • vzq@lemmy.blahaj.zone
      link
      fedilink
      arrow-up
      2
      ·
      9 months ago

      Any relatively large home made out of reinforced concrete will need multiple access points with cable connections.

      I use UniFi myself. My parents have a grandstream setup. They are both very good. Best bang for buck right now is probably tplink omada but those acces points are hideous.

  • sylver_dragon@lemmy.world
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    9 months ago

    I’m personally a fan of microtik products. It’s nice as they have a lot of built in management features. However, the downside is that there is a learning curve to their products which can feel like a vertical wall some times.

    • 𝒎𝒂𝒏𝒊𝒆𝒍@sopuli.xyz
      link
      fedilink
      English
      arrow-up
      3
      ·
      9 months ago

      are there any AX routers supported by DD-WRT? all routers your article suggests are AC routers, quick research show no AX routers on support lists

      • ace_garp@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        9 months ago

        As far as I can see, there may be no AX routers supported under dd-wrt.

        There are about 40 AX routers here that appear to be supported by OpenWrt(2 pages).

  • steal_your_face@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    ·
    9 months ago

    I have a gl.inet router and it’s great. Super easy to setup and supports wireguard out of the box. It has some cool travel features as well.

  • unknowing8343@discuss.tchncs.de
    link
    fedilink
    arrow-up
    4
    ·
    edit-2
    9 months ago

    Before buying, look for secondhand ones, many people move to a different house where their previous system becomes obsolete, or they upgraded to a different beast.

    • wheresmysurplusvalue [comrade/them]@hexbear.net
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      9 months ago

      How hard is it to put openwrt on any old commodity router if it’s on the compatible devices list? Is it basically just using the old router’s firmware update page and loading the openwrt firmware image?

      Thinking about gifting a new wifi access point for one of my friends with a crap router that doesn’t even support 5ghz channels

      • Maoo [none/use name]@hexbear.net
        link
        fedilink
        English
        arrow-up
        2
        ·
        9 months ago

        There is usually a per-router guide on installation. Sometimes you can just use the built-in firmware flashing interface, sometimes you have to do funny things like do that twice in a row, sometimes you need to access a special interface.